Quick connector is one of the most popular products used for quick and simple connecting or disconnecting of two separated tubes. There are four models, male connectors, female connectors, sealing plug and sealing cap. The male connector shall be used together with female connector or sealing plug and the female connector shall be used with male connector or sealing cap as a couple to sealing the tube.

The design of double sealing gasket to guarantee the sealing performance. The resistance test under the pressure of 2bar and 4bar has been completed.
Quick connector can be sterilized by γ sterilization and autoclave.
Gamma irradiation (if applicated): 25-45kGy. Autoclave (if applicated): 121℃ 30min, less then three times.
All the joints are produced by injection mold and then are cleaned by purified water, dried and packaged in clean room.
Products of pre-sterilization and post-sterilization are both available.
The joints can be used in bioprocess or single-use bags production directly after removing the inner package and it is not necessary to do the clean before using these joints. Insoluble particle test is done for every batch of the products. Bacterial endotoxin test is based on previous performed test. 。